FR 1000 QUICK GUIDE
Before starting the configuration of your FR1000 terminal, 
Please be sure you have complete steps below :

1. Installed AMG software installation 
2. Complete the AMG software configuration wizard. 

 



I. Enroll an Administrator
Enrolling an administrator means you enrolled as a user with a full access to terminal. 
once an terminal administrator has been enrolled, time clock menu access will be restricted to only administrator level user.

 NOTE: be sure to create the admin porfile correctly or after adding the device to the software to avoid being locked out of the device 


Access Administrator Menu
1. Press and hold 'M'/'Ok' button for few seconds, administration menu will be open. 
2. Select 'User Mgt.' then press 'OK' Select 'new user' then press 'OK' button.
Specify your desired Admin ID example '123 '.


Enroll Admin's Face
1. Navigate down to 'Face' by pressing down button then press 'Ok' button.
2. The device will prompt you to focus your eyes and position your face for it to create a facial template.
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  

 

Enroll Admin's Fingerprint 
1. Navigate down to 'Fingerprint' by pressing down button then press 'Ok' button.
2. The device will ask what finger you will be enrolling. Press “Ok” on the appropriate finger and place the finger down to scan.
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  

    You may enroll up to 10 fingers per admin or employee  



Enroll Admin's PIN Code (optional)

1. Navigate down to 'Password' by pressing down button then press 'Ok' button.
2. The device will ask you to input a password. After your input, press Confirm (OK)
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  


II. Configure Internet Communication


A. AMG Server Client Version 

ETHERNET OPTION 

1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately verify your finger/face/password. 
3. Once you are verified as administrator, administration menu will be open. 
4. Select 'Comm' Press 'OK' Button. 

5. Select 'Ethernet' Press 'OK' Button. 

6. Make sure DHCP is enabled at the bottom right of the device

7. A new IP will be automatically pulled from the network (192.168.X.X is the most common) take note of this number 

8. Select “ESC” once completed.

9. Press 'ESC' Several times to returned to Main Screen. 


WIFI OPTION 

1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately verify your finger/face/password. 
3. Once you are verified as administrator, administration menu will be open. 
4. Select 'Comm' Press 'OK' Button. 

5.Select 'Wireless' Press 'OK' Button. 

6.Find the correct wireless network and input your wifi password

7.Once connected click on the networks name again and you will see the IP Address 


ONCE AN IP IS FOUND

Follow this guide to add the device to the software


B. AMG Cloud Solution (Web based)

1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately verify your finger/face/password. 
3. Once you are verified as administrator, administration menu will be open. 
4. Select 'Comm' Press 'OK' Button. 

5. Select 'Ethernet' Press 'OK' Button. 
6. Make sure you are either connected with static IP or DHCP is enabled. See above for instructions.  
7. Select “ESC” to go back to “Comm” menu, navigate to “Cloud Server Setting”
8. Domain Name should be turned off. Server Address will be  209.50.60.75 and the Server Port will be 80.  Enable Proxy Server should be off.

9. Press 'Esc' Several times to returned to Main Screen. 

 

 


III. Enroll Employee 
!!! Attention !!! Please be sure, you already added your employee profile in the software before you begin enrolling employee on time clock. 

Process enrolling employee is exactly the same as enrolling administrator, however regular employee will not have full access to time clock menu. 

1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately verify your finger/face/password.
3. Once you are verified as administrator, administration menu will be open. 
4. Select “User Mgt” then press “New User”
5. Specify Employee ID example '888 '. (This should be the badge number of the employee from the software)

 

Enroll Employee's Face
1. Navigate down to 'Face' by pressing down button then press 'Ok' button.
2. The device will prompt you to focus your eyes and position your face for it to create a facial template.
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  


Enroll Employee's Fingerprint 
1. Navigate down to 'Fingerprint' by pressing down button then press 'Ok' button.
2. The device will ask what finger you will be enrolling. Press “Ok” on the appropriate finger and place the finger down to scan.
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  

Employee's PIN Code (optional)

1. Navigate down to 'Password' by pressing down button then press 'Ok' button.
2. The device will ask you to input a password. After your input, press Confirm (OK)
3. Once completed, it will return to the enrollment page. You can click “ESC” to save and return.  


Tech Support 
AMG Server and Client System 
AMGTime provides a complimentary phone support for 30 days  date of AMG software registration 
please check our support contract page for extended support after 30 days.

AMG Cloud Solution
AMGTime provides unlimited phone tech support for each AMG web cloud subscription.