NOTE: In order to create a restriction and apply it to an employee, the software will require the Device Time Restrictions module. Please go to Help - About in the software to make sure you have this module enabled.


Enabling Time Restrictions on the Device:

  1. Hold the “M/OK” button
  2. Once you are in the administrator menu, select “User Mng” and press the "M/Ok" button then "Access" and press the "M/Ok" button

 

Set up Time Restrictions for 100C & BS922 Devices Image 1
 
Set up Time Restrictions for 100C & BS922 Devices Image 2

       3. Press "M/OK" on “Time Zone Setting”


Set up Time Restrictions for 100C & BS922 Devices Image 3

Set up Time Restrictions for 100C & BS922 Devices Image 4

       4. Set the TZ (Time Zone) to 1, and repeatedly click “M/OK” until you see the TZ value reach 50. 

 

Set up Time Restrictions for 100C & BS922 Devices Image 5

 

NOTE: DO NOT change any other values on the device. The actual time restrctions should be set from the software. Make sure SUN through SAT reads 00:00 to 23:59 for each timezone.

 

You will then setup the time restrictions and apply them to employee in the software. Follow this guide for the desktop (client/server) software and this guide for the web (amgwebtime.com) software.