When configuring Departments and job in AMG attendance system first you need to assign the specific Actions to the clock:

  1. Go to Devices
  2. Configure devices
  3. Add/Edit Device.
  4. Select "AMG 100-C Biometric"
  5. Work Code Action: Enter department, enter Job, select the action you would like the employee to perform on the Clock when clocking in.

 AMG 100-C Department and Jobs Assignment Image 1

        6. Department: allow you to assign Your AMG 100-C to a specified Department only. ( when using this option you are determining that the clock belongs to that specified department and all clock ins are from that department only.

AMG 100-C Department and Jobs Assignment Image 2
 
        7. Press OK to save.

Instructions for setting up the AMG 100-C to take department/Jobs actions when employees use the biometric clock:

  1.  ON AMG 100-C access the menu of the clock by holding done M/OK button until menu opens, or you see a padlock requesting admin Affirm to unlock the clock.
  2. Select System
  3. Select Keyboard
  4. Select Key 0
  5. Function set to Workcode

To View workcodes in the AMG 100-C:

  1. ON AMG 100-C access the menu of the clock by holding done M/OK button until the menu opens, or you see a padlock requesting admin Affirm to unlock the clock.
  2. User Manger (User Mng)
  3. WorkCode
  4. Press the M/OK Button to Add New, Edit and Delete work codes

Steps employees will take to Clock into A Specified Department/Job:

  1. Employee Press the Zero Key on the clocks select the Workcode (department/job) By scrolling using the Arrow keys Up and Down or type in the Workcode Number press M/OK Button and place finger on the scanner.