Configuring Push Server for Iris-100

To enable data transmission from the device to a web server, follow the steps below:


Web Server Details (for AMG WebClock)

  • Web Server URL: amgwebclock.com

  • Web Server IP: 209.50.60.75

  • Port Number: 80


Steps to Configure Push Server

  1. Enter Administrator Menu:

    • Press the “...” icon located at the top-middle left corner of the device screen.

  2. Navigate to Network Settings:

    • Select “Network” from the menu.

  3. Access Web Server Settings:

    • Click on “WEB SERVER.”

  4. Enable Push Mode:

    • Make sure “Enable Push Mode” is turned ON.
      This is required for the device to transmit data to the server.

  5. Configure Server Information:

    • If you're using AMG WebClock:

      • Enter the URL or IP address exactly as provided above.

    • If you're using your own client/server:

      • Input your server’s IP Address and applicable Port Number.


Tip: Always double-check network connectivity and firewall settings to ensure successful communication between the device and the server.