Step 1: Access User Menu

  1. Press the [Clear] button, then press the [Enter] button.
  2. Enter your user ID and press the [Enter] button.
  3. Place your hand on the sensor. If recognized, the message "ENTER PASSWORD" will appear.

Step 2: Enter Password

  1. Enter [4] and press the [Enter] button.
  2. You should now see "ADD EMPLOYEE" on the screen with options *“ No # Yes”**.

Step 3: Navigate to Add Supervisor Option

  1. Press the [*] button once.
  2. The screen will show "ADD SUPERVISOR" with options *“No # Yes”**.
    • If you miss this option, press the [*] button a few times to cycle through the menu until you see "ADD SUPERVISOR".

Step 4: Confirm to Add Supervisor

  1. Press the [#] button for Yes.

Step 5: Enter New Supervisor ID

  1. Enter the new supervisor’s ID and press the [Enter] button.

Step 6: Enroll Supervisor's Hand

  1. Ask the supervisor to place their hand on the sensor three times as prompted.
  2. After enrollment, you should see "EMPLOYEE ENROLLED" on the screen, followed by "ADD EMPLOYEE" with options *“ No # Yes”**.

Step 7: Add Another Supervisor (Optional)

  1. If you want to add another supervisor, repeat Step 3.
  2. If you're finished, press the [Clear] button to return to the main display.