Elionic 310 Mounting Guide

General installation steps

1. Choose a suitable mounting location with access to power.

2. Position the mounting bracket against the wall and mark the screw holes.

3. Secure the bracket using appropriate wall anchors or screws for the wall material.

4. Attach the Elionic 310 to the mounting bracket.

5. Adjust the viewing angle and tighten the mounting hardware.

6. Connect the power supply and Ethernet or Wi-Fi.

Important: Make sure the bracket is securely fastened before attaching the device. The exact screw arrangement depends on which mounting bracket you have.

With Backplate

1. Paste the mounting template sticker onto the wall, and drill holes according to it.
   
2. Fix the Backplate to the wall using wall mounting screws.
   
3. Attach the device to the Backplate.
4. Fasten the device to the Backplate with a security screw.
   

With Back Cover

Back Cover is divided into right-tilt installation or left-tilt installation, the following is an example of right-tilt installation
Back Cover

Backplate

Mounting Template

1. Paste the mounting template sticker onto the wall, and drill holes according to it.
   
2. Fix the Back Cover to the wall using wall mounting screws.
   
3. Attach the Backplate to the Back Cover.
4. Attach the device to the Backplate, and fasten the device to the Backplate with a security screw.