Step 1: Prepare the AMG 100C Device

  1. Plug in the USB Drive

    • Insert the USB drive into the USB port on the AMG 100C device.

  2. Access the Menu

    • Press and hold the M/OK button on the device for a few seconds to access the menu.

  3. Select the PenDrive Option

    • From the menu, scroll and select the PenDrive option.

  4. Select 'Download'

    • Choose the Download option from the list.

  5. Select 'Download Attlog'

    • Select Download Attlog to initiate the log transfer process.

  6. Press OK

    • Confirm the selection by pressing the OK button.

  7. Remove USB Drive

    • Once the data transfer has been completed, safely remove the USB drive from the AMG 100C device.

Step 2: Poll the Data Using the Software

  1. Log in to the Software

    • Open the associated software and log in with your credentials.

  2. Navigate to the Polling Section

    • In the software, go to Standard and select the Poll option.

  3. Select the 'From File' Tab

    • Click on the From File tab to select the USB drive as the source of the data.

  4. Choose the Device

    • In the device selection menu, choose the AMG 100C device.

  5. Browse for the USB Drive

    • Click on Browse to locate the USB drive on your computer.

  6. Select the '1_attlog' File

    • Navigate to the Removable Disk or USB Drive and select the 1_attlog file.

  7. Click Open

    • After selecting the file, click Open to load the data.

  8. Click Poll

    • Finally, click Poll to initiate the polling process and transfer the data from the USB drive into the software.