Configuring Serial Connection for Handpunch
If you have a hand punch without an ethernet adapter, then you will have to connect it using a serial cable. You can directly connect the serial cable to one of the ports on your computer, or you can use a serial-to-usb converter and have the usb cable plugged into the computer, with the other end being the serial cable, into the Handpunch device.
After connecting your device to the computer, we want to configure the settings on how it will communicate and at which rate. Follow the steps below in order to configure your RS232 settings on your handpunch device.
Now that we have completed the configuration on the device, we will need to go to the computer, finish the configuration and get the device connected.
Web/Cloud Software (amgwebtime.com)
Copyright © 2020 AMG Employee Management. All rights reserved.