Here are the steps to connect an Elionic timeclock to the AMG Attendance System (Client/Server), to be able to use the Self-Service function of the device and enable push transactions. First make sure your device is setup in the software and has the correct IP address configured.
In the Software:
On the Device:
Select Network, then Web Server.
Touch the 'Enable Push mode' button so it says 'Yes'.
Under Host Name/IP Address enter the local IP address of the computer with the AMG client installation.
Under Port Number enter the port # 3003
Restart device (hold down power button on left side of device) and press Ok on the prompt.
Once the device powers back up you should see the Self Service option on the top right of the screen. As soon as you press on Self Service it will ask for the employee's fingerprint.
Through Self Service the employee will have access to see their last punches, worked hours, schedule, and benefits. They can also see or make time off requests.
Copyright © 2020 AMG Employee Management. All rights reserved.