How to connect the Elionic with client server to use with self-service.
Step 1: Click on the Devices tab.
Step 2: Click on Configure Devices.
Step 3: Select desired device. Double click or click on Edit.
Step 4: Click on the Advance tab in the edit device screen.
Step 5: Check off Enable self Service towards bottom of screen.
Step 6: Click on OK
Step 7: You will be prompted to Synchronize changes with Device. click YES.
Step 1: Go into the main menu by selecting the 3 dotted button towards the top of the screen.
Step 2: Select the Button Labeled with Network
Step 3: Choose the Web Server option.
Step 4: Enable Push mode.
Step 5: Under Host Name/IP Address enter the clients local IP address.
Step 6: Under Port Number enter the port # 3003
Step 7: Restart device(hold down power button on left side of device)
Once the device powers back up you should see the self-service option on the top right of the screen. As soon as you press on self-service it will ask for the employees finger print.