BS 922 QUICK GUIDE

BS 922 QUICK GUIDE


Before starting configuring your BS 922 terminal, 
Please be sure you have complete step below :


1. Installed AMG software installation 
2. Complete the AMG software configuration wizard. 


Terminal Navigation and Control
 
 

 


 
  : Navigate up and down. 

 
 : Navigate left and power button switch when pressing and hold button. 

 
   : Navigate right. 

 
F1-F8 : Function buttons. 





I. Enroll an Administrator

Enrolling an administrator means you enrolled as a user with a full access to terminal. 
once an terminal administrator has been enrolled, time clock menu access will be restricted to only administrator level user.


Access Administrator Menu
1. Press and hold 'M'/'Ok' button for few seconds, administration menu will be open. 
2. Select 'User Mng' then press 'OK' Select 'new users' then press 'OK' button.
3. Specify your desired Admin ID example '123 '.

Enroll Admin's Fingerprint 
4. Select 'enroll FP' by pressing down button then press 'Ok' button.
5. Place the first finger you like to use and place it three times as prompted by time clock. 
6. Press Ok when you are ready to continue with the second finger. 
    you may enroll up to 5 fingers per admin or employee or Press 'esc' button to finish fingerprint enrollment and returned to previous screen. 

Enroll Admin's PIN Code (optional)
7. Select 'Enroll PWD' press 'OK' button then specify PIN number twice then select OK then press OK button. 
 
Enroll Admin's Proximity Card / FOB  (Optional)
8. Select 'Enroll Card' press 'Ok' button then wave proximity card / FOB in-front keypad. 

Security level Assignment 
9. Select 'Purview' then use right or left button to change security level to 'Admin' 
10. Select 'OK' then press 'Ok' button to save your administrator enrollment. 





II. Configure Ethernet Communication
based on the type of software license of subscription please configure your time clock accordingly.
If you are not sure which AMG system you have, please call us at 323 254 7448. 

Note :
If your software comes in a USB flash drive and requires installation then you have AMG Server Client Version. 
If you need to login to www.amgwebtime.com to access your attendance app, then you have AMG Cloud Solution. 


A. AMG Server Client Version 

1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately place your finger on sensor. 
3. Once your fingerprint is verified as administrator, administration menu will be open. 

4. Select 'Comm' Press 'OK' Button. 
5. Select 'Network' Press 'OK' Button. 

6. Specify IP address, Subnet mask and Gateway.* 
*Please consult with your IT department for these information. 

7. Select  'DHCP' and use the left button to set it 'Off'. 

8. Select 'OK' then press Ok button. 
9. Press 'Esc' Several times to returned to Main Screen. 
10. Reboot your Time Clock by pressing and hold the power button ( button under #7 button). 



B. AMG Cloud Solution (Web based)


1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately place your finger on sensor. 
3. Once your fingerprint is verified as administrator, administration menu will be open. 

4. Select 'Comm' Press 'OK' Button. 
5. Select 'Network' Press 'OK' Button. 

6. Select  'DHCP' and use the left button to set it 'ON'.  select Ok then press 'Ok 
7. Select 'Web Setup' , Set as 'URL Mode', specify url : www.amgwebclock.com | specify port number :80
8. Select 'OK' then press Ok button. 
9. Press 'Esc' Several times to returned to Main Screen. 
10. Reboot your Time Clock by pressing and hold the power button ( button under #7 button). 






III. Enroll Employee 

!!! Attention !!! Please be sure, you already added your employee profile in the software before you begin enrolling employee on time clock. 

Process enrolling employee is exactly the same as enrolling administrator, however regular employee will not have full access to time clock menu. 
 
 
1. Press and hold 'M'/'Ok' button for few seconds, Time clock will display ' Admin affirm' along with padlock picture. 
2. Immediately place your finger on sensor. 
3. Once your fingerprint is verified as administrator, administration menu will be open. 
4. Select 'new users' then press 'OK' button.
5. Specify Employee ID example '888 '.

Enroll Employee's Fingerprint 
6. Select 'enroll FP' by pressing down button then press 'Ok' button.
7. Place the first finger you like to use and place it three times as prompted by time clock. 
8. Press Ok when you are ready to continue with the second finger. 
you may enroll up to 5 fingers per employee or Press 'esc' button to finish fingerprint enrollment and returned to previous screen. Enroll

Employee's PIN Code (optional)
9. Select 'Enroll PWD' press 'OK' button then specify PIN number twice then select OK then press OK button. 
 
Enroll Employee's Proximity Card / FOB  (Optional)
10. Select 'Enroll Card' press 'Ok' button then wave proximity card / FOB in-front keypad. 

Security level Assignment 
11. Makes sure 'Purview' level is set to  'User' 
12. Select 'OK' then press 'Ok' button to save your employee enrollment. 




Tech Support 
 
AMG Server and Client System 
AMGTime provides a complimentary phone support for 30 days  date of AMG software registration 
please check our support contract page for extended support after 30 days.

AMG Cloud Solution
AMGTime provides unlimited phone tech support for each AMG web cloud subscription. 
Live Chat Software